Home » What is the Netgear EX7500 Extender?

What is the Netgear EX7500 Extender?

by William Beel
0 comment

The Netgear EX7500 is a mid-budget dual-band Wi-Fi extender that may be used to extend the range of your Wi-Fi signal without running cables throughout your home.

It includes a mains passthrough connector, which means it won’t take up one of your plug sockets, and it can support Wi-Fi speeds of up to 750Mbps.

Netgear EX7500 Design and Features

  • I don’t think the EX7500 is the most fashionable piece of gear I’ve ever seen. The Linksys RE6400 AC1200 Boost Ex, for example, has a boxy shape, a lot of ventilation holes, and a silver front plate.
  • Nonetheless, it’s a little device, measuring 55x114x34 mm, and the mains passthrough greatly decreases its overall footprint.
  • Visit mywifiext.net or for more information. Setup
  • The four lights on the front clearly indicate the state of the extender, indicating that it’s up and running and connected to the rest of your network. Power, WPS, Router Connection, and Device Connection are the four lights on the front that clearly indicate the state of the extender, indicating that it’s up and running and linked to the rest of your network.

Best Wi-Fi Extenders (Related)

WPS is activated via a button on the left side, which allows you to connect to your router with just one button press. Below this is a power button that can be used to turn off the extension rather than simply detaching it, making it more convenient. It functions as a mains passthrough even when switched off, which is convenient.

A single Ethernet port is located on the right for connecting wired devices to your WiFi network. This is perfect if you have a network printer or desktop PC that doesn’t have built-in Wi-Fi, and it also ensures that you get the most out of the EX3800 without compromising performance.

However, because the network wire protrudes to the side, the location is a little strange. It would be easier to keep things tidy if it faced straight down.

How do i Setup Netgear EX7500 Setup

  • The initial configuration of the Netgear EX7500 wifi extender Setup is straightforward. Simply connect the extension to your router and press the WPS button on the router. After thirty seconds, the two will connect, and you’ll be ready to go.
  • However, in order to connect both bands of your Wi-Fi, you must connect to the extender’s network and go to www.mywifiext.net (or type in its IP address), which is where the experience starts to degrade.
  • Netgear asks you to sign up for its Netgear Genie service before you can access the Settings page. This is inconvenient because you shouldn’t have to do this before setting up the device, and it isn’t necessary for the EX3800 to work correctly.
  • Because Genie can only be used with a Netgear router, joining up for a subscription for what is effectively a cross-platform gadget seems unnecessary.
  • Otherwise, once you’ve completed the signup process, the settings page is simple and basic, allowing you to configure the extender to extend both Wi-Fi bands, as well as change their names and passwords.

 Netgear EX7500 Extender Performance

  • To test the EX7500, I placed it about 10 metres away from the router, with two brick walls separating them. Like the Linksys RE6400, its link to the router shifted from green to amber at this time, indicating that it was nearing the end of its useable range.
  • Using a laptop with an AC1900-compatible WiFi card, I moved another 8m or so away from the router and extension. The router alone would drop connection at this range when using the laptop’s weaker inbuilt Wi-Fi.
  • Without the extension, the Netgear EX7500 achieved 34.5Mbps on 2.4GHz and barely 2.8Mbps on 5GHz, amply justifying its price. While 5GHz may be quicker overall, 2.4GHz has a longer range.
  • I observed that the EX3800’s Wi-Fi extended signal was slower than the direct signal, dropping to 27.1Mbps at 2.4GHz. Although the loss isn’t as drastic as with the Linksys RE6400, it does show the incredible range of 2.4GHz Wi-Fi, especially when combined with a powerful multi-aerial router.
  • However, in the case of 5GHz, the opposite was true. It increased to 61.9Mbps, indicating how important it is to have a high maximum speed but a limited range. Overall, finding the optimum sweet spot for the extender will likely be a question of trial and error, but it’s a no-brainer if you just use the 5GHz band.
  • Regardless, the higher-specified Linksys EX3800 outperformed the EX3800, which obtained 71.4Mbps in the same test.

Is the Netgear EX7500 a good buy?

  • The EX3800 is a good solution for individuals looking to extend their Wi-Fi signal to those hard-to-reach regions. It’s easy to set up, has good Wi-Fi speeds, and a useful set of features, with the mains passthrough standing out.
  • It’s also fairly priced, with a suggested retail price of around £50. That’s £10 less than the Linksys RE6400, which has similar performance, and just £10 more than the BT 11ac Dual-Band Wi-Fi Extender 1200, which doesn’t have the Netgear’s mains passthrough.
  • The primary stumbling block is Netgear Genie’s irritating registration requirement, which is entirely unnecessary for a device of this calibre. It’s a little annoyance, but one that some customers may find bothersome.

    you can also find Technology Latest Update .

You may also like

ideal news tech

IdealNewsTech is one of the subsidiaries of Imperion Info media is an aggregator for content and provides a platform for budding and experienced writers. They take immense pride in building a stage for writers to come together and share their most exquisite works with their unexplored audiences. Ideal News Tech relates itself to a platform for sharing knowledge about various niches and making people aware of the changing trends and patterns of multiple industries.

Edtior's Picks

Latest Articles

Copyright ©2022 All rights reserved  by Ideal New Tech